Launch CRP123E vs CRP129E vs CRP123 vs Creader VIII vs CRP129

LAUNCH Creader CRP123E and CRP129E, designed with advanced hardware and more powerful functions, already replace CRP123, Creader VIII & CRP129.

Look at this comparison table:

Look at the large image of LAUNCH Creader CRP123E:
Source: http://www.obd2eshop.com/wholesale/launch-crp123e-code-reader.html

No special functions

Android based O.S., 5' inch touch screen, easy to use.
More cars covered, updated version of CRP123 and Creader VII+
Fast VIN autodetect (will read VIN information when you connect Car)
Free update lifetime, and one-click update via WiFi
Automatically generate and upload diagnostic reports

Multi-protocol: OBDII, EOBD, JOBD, KOBD
Multi-language: English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese
And works for the systems Engine , ABS Airbag , SRS and Transmission 

And the large image of LAUNCH Creader CRP129E:

Source: http://www.obd2eshop.com/wholesale/launch-x431-crp129e-obd2-creader.html

Support Multi-Protocols: OBDII , EOBD, JOBD , KOBD
Lifetime Free Update , Support One-Click Update Online via Wifi
Support Multi-language :English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese

CRP129E is an upgraded Version of CRP129 and Creader VIII , Support more car
Fast VIN autodetect, CRP129E will read VIN information when you connect Car
Automatically generate and upload diagnostic reports
Support 5 reset Function : EPB/Oil/SAS/ ETS/TPMS reset
5'inch Android Touch Screen, Easy to operate
CRP129E support multi-protocols test for a complete diagnosis.
CRP 129E also supports the system diagnosis of Engine , ABS Airbag, SRS and Transmission system

Enjoy.

www.obd2eshop.com


Source:http://blog.obd2eshop.com/why-launch-crp123e-crp129e/

Nissan Xtrail EDC16CP33 injectors with Launch X431: Done

Problem description: Read flash by obd2, injectors coding gone. I’d tried use option in galletto coding can but no result. I couldn’t write codes. Is chance write codes in eeprom manual? in .rar is eeprom without codes and file with codes. THANKS
8H8O3SG- 1 FROM GEARBOX
8IHK5WG-2
71HV3WE-3
8SHT8IF-4

Info: it is keyless

https://mega.nz/#!ERYB3Y5L!oe_SqUGuY1Oz_VKgMd0HBrcO2O9DLwWJNkAUgCzsSRg

What I tried to do:

I tried write file with my codes but i couldn’t write it… i have two errors first is bad coded injectors and chain immu. this happened after write flash by obd. coding injector was gone launch x431 didn’t code.

Same experience for sharing:

Had these problems with same ECU EDC16CP33, just on Qashqai (with keyless system…). You won’t be able to adapt injectors when you have problems with IMMO – “chain immu”, first adapt keys/ecu with launch. When you choose Nissan, when first screen pop’s up after bt is connected you should go to special functions or coding, and adapt the ecu, after immo is sorted and car starts, then you can write injector codes with diagnostic equipment Had this problem, sorted with Launch X431 without problems.

Finally Solved:

With hez editor i edit my corrupted eeprom some things add some delete… atlast was one error bad coding injectors with launch write codes ( first not from gearbox like in Renault ) 1 is from time belt .. and car start without problem.

Here is my work with all files and how i fix my original eeprom without virgin. I hope it will help for somebody.

https://mega.nz/#!FcZlWSYI!h8HDObN25Qsir4CFknCJzI-OiZ6Vc3WOK2iZqYDlz18

Password:

Question:

can do virgin? and program the unit again, while recovering the loss
Once I wrote down the injectors in flash. restored with ecm opening, while there was fullflash bottom ecm

Answer: I fix my corrupt eeprom with HEX CMP very easy. but i spend few hours.. atlast is 4kb data memory. my work with files is here.

Good luck.

Thanks to @3inferno3 (DK Veteran).

www.obd2eshop.com

Related Posts:

1. Comparison of Original Launch X431 Scanners (3)
2. How to Use Launch X431 IV to Solve VW Touareg Airbag SRS Problem (2)
3. EUCLEIA TabScan S8 Good or Not? (2)
4. How to Register and Upgrade Launch TS971 TPMS Tool (2)
5. How to make X431 HD work in the Android device without X431pad? (2)

http://blog.obd2eshop.com/nissan-xtrail-edc16cp33-injectors-with-launch-x431/

How to use Launch X431 V code E60 BMW 535xi (N54) INJECTORS?

Look here: how to use Launch X431 V to recode or change the injector flow rate for BMW’s, this was done a 2008 E60 535xi with the N54 direct injection twin turbo engine.

Select "BMW" - then "OK" to confirm the BMW newest Version (V50.00) is not the newest version, here is just an example.

Automatically search.


Information
1.If equipped with two socket, 20-pin and 16-pin, please use [BMW-20] connector.


Read out the BMW information.


Help Information:
To ensure the accuracy of the test results, Do the following:

1. Turn off the Ignition Switch.
2. Wait 10 seconds.
3. Turn on the ignition switch.

Select "System Scan".

Select "Drive" , then "ECM (Engine Control Module -DME/DDE)".


ECU Identify.


Special Function.


Select "Adjust Injectors."


Selection:

1. Description of Injector Rate Adjustment.

2. Perform Injector Quantity Compensation.

End the session.
Launch X431 V to recode or change the injector flow rate for E60 BMW 535xi (N54)，works  done!
Enjoy.

www.obdexpress.co.uk



http://www.obdexpress.co.uk/service/launch-x431-v-to-recode-injector-flow-rate-for-bmws-36826.html