2019年5月26日星期日

Nissan Xtrail EDC16CP33 injectors with Launch X431: Done

Problem description: Read flash by obd2, injectors coding gone. I’d tried use option in galletto coding can but no result. I couldn’t write codes. Is chance write codes in eeprom manual? in .rar is eeprom without codes and file with codes. THANKS
8H8O3SG- 1 FROM GEARBOX
8IHK5WG-2
71HV3WE-3
8SHT8IF-4

Info: it is keyless


What I tried to do:
I tried write file with my codes but i couldn’t write it… i have two errors first is bad coded injectors and chain immu. this happened after write flash by obd. coding injector was gone launch x431 didn’t code.

Same experience for sharing:
Had these problems with same ECU EDC16CP33, just on Qashqai (with keyless system…). You won’t be able to adapt injectors when you have problems with IMMO – “chain immu”, first adapt keys/ecu with launch. When you choose Nissan, when first screen pop’s up after bt is connected you should go to special functions or coding, and adapt the ecu, after immo is sorted and car starts, then you can write injector codes with diagnostic equipment Had this problem, sorted with Launch X431 without problems.

Finally Solved:
With hez editor i edit my corrupted eeprom some things add some delete… atlast was one error bad coding injectors with launch write codes ( first not from gearbox like in Renault ) 1 is from time belt .. and car start without problem.

Here is my work with all files and how i fix my original eeprom without virgin. I hope it will help for somebody.
Password:

Question:
can do virgin? and program the unit again, while recovering the loss
Once I wrote down the injectors in flash. restored with ecm opening, while there was fullflash bottom ecm
Answer: I fix my corrupt eeprom with HEX CMP very easy. but i spend few hours.. atlast is 4kb data memory. my work with files is here.

Good luck.

Thanks to @3inferno3 (DK Veteran).


Related Posts:

http://blog.obd2eshop.com/nissan-xtrail-edc16cp33-injectors-with-launch-x431/

2019年5月22日星期三

How to use Launch X431 V code E60 BMW 535xi (N54) INJECTORS?

Look here: how to use Launch X431 V to recode or change the injector flow rate for BMW’s, this was done a 2008 E60 535xi with the N54 direct injection twin turbo engine.

Select "BMW" - then "OK" to confirm the BMW newest Version (V50.00) is not the newest version, here is just an example.
launch_x431_how_to_code_e60_bmw_535xi_n54_injectors-01 launch_x431_how_to_code_e60_bmw_535xi_n54_injectors-01 launch x431 how to code e60 bmw 535xi n54 injectors 3
Automatically search.
launch x431 how to code e60 bmw 535xi n54 injectors 4

Information
1.If equipped with two socket, 20-pin and 16-pin, please use [BMW-20] connector.
launch x431 how to code e60 bmw 535xi n54 injectors 5 launch x431 how to code e60 bmw 535xi n54 injectors 6 launch x431 how to code e60 bmw 535xi n54 injectors 7

Read out the BMW information.
launch x431 how to code e60 bmw 535xi n54 injectors 8 launch x431 how to code e60 bmw 535xi n54 injectors 9

Help Information:
To ensure the accuracy of the test results, Do the following:
  1. Turn off the Ignition Switch.
  2. Wait 10 seconds.
  3. Turn on the ignition switch.
launch x431 how to code e60 bmw 535xi n54 injectors 10 launch x431 how to code e60 bmw 535xi n54 injectors 11 launch x431 how to code e60 bmw 535xi n54 injectors 12 launch x431 how to code e60 bmw 535xi n54 injectors 13

Select "System Scan".
launch x431 how to code e60 bmw 535xi n54 injectors 14
Select "Drive" , then "ECM (Engine Control Module -DME/DDE)".
launch x431 how to code e60 bmw 535xi n54 injectors 15 launch x431 how to code e60 bmw 535xi n54 injectors 16

ECU Identify.
launch x431 how to code e60 bmw 535xi n54 injectors 17

Special Function.
launch x431 how to code e60 bmw 535xi n54 injectors 18

Select "Adjust Injectors."
launch x431 how to code e60 bmw 535xi n54 injectors 19

Selection:
  1. Description of Injector Rate Adjustment.
launch x431 how to code e60 bmw 535xi n54 injectors 20 launch x431 how to code e60 bmw 535xi n54 injectors 21 launch x431 how to code e60 bmw 535xi n54 injectors 22 launch x431 how to code e60 bmw 535xi n54 injectors 23
  1. Perform Injector Quantity Compensation.
launch x431 how to code e60 bmw 535xi n54 injectors 24 launch x431 how to code e60 bmw 535xi n54 injectors 25 launch x431 how to code e60 bmw 535xi n54 injectors 26

End the session.
Launch X431 V to recode or change the injector flow rate for E60 BMW 535xi (N54),works  done!
Enjoy.

www.obdexpress.co.uk



http://www.obdexpress.co.uk/service/launch-x431-v-to-recode-injector-flow-rate-for-bmws-36826.html